How to Properly Maintain Your Australian Plunge Pools

As a swim spa with Australian spa parts owner, it is natural to make it a habit of hopping into your hot tub with great gusto and regularity,  most especially after working like a dog all day. But apart from making the most out of it, the next thing that you need to concern yourself about is its proper maintenance or upkeep.

There is more to a swim spa maintenance than just cleaning its exteriors. But the most important aspect of this upkeep work goes beyond that. When it comes to maintaining your swim spa, according to a spa shop near me, it is crucial that you know and understands what water chemistry is all about, particularly when it is about pH levels.

What is So Important About Swim Spa Water pH Level? 

If you want to know how to measure out how acidic or basic your swim spa pool water is, you will need to know its current pH level.  It is highly recommended that you check out the pH level of your swim spa at least twice a week, and this is because there are manifold reasons that will make it change. 

The acceptable range for pH level is between 7.2 to 7.8. So this means to say there is something to be alarmed about if pH reading would go below or above those ranges. If you see that your water pool pH is above 7.8, water is basic. Water that is basic is usually going to have a cloudy appearance. So, therefore, if you will put on some sanitizing solution to it, anticipate that it will work poorly then. 

A high pH level is also associated with an array of health risks such as skin and eye irritations.  Also, the addition of chlorine-based products to your pool water like bromine tends to make it less effective.  

Things go the other way around when water pH is below 7.2, it signifies that your pool water is more acidic.  Besides causing sanitizers to work poorly and thus become less effective, it has been found out also to cause burns on the eyes and induce cosmetic damage to your hot tub surface. Low pH levels also cause equipment corrosion, including your hot tub inside the lining system. 

Therefore, it is crucial to keep your swim spa water pH level in balance. The last thing you want to concern yourself about is someone from your household getting ill due to your negligence in checking this aspect of your Australian plunge pools

If the imbalance of your swim spa water pH level ruined your hot tub,  that only means to say no more blissful, relaxing time for you and your household — just the costly repair works for whatever damage your outdoor water entertainment feature suffered. 

 

How To Check and Balance Your Pool Water pH Levels? 

There are several different ways you can test out the water pH level of your swim spa. One is by the use of available test strips. You can obtain this from any spa shop Sydney store near you. Different pH test strips and kits are different. Therefore, paramount to a successful, reliable, and accurate pH level reading is you follow exactly the user instructions when testing out the pH levels.  

After determining that your pool water pH levels are too high or too low,  the next course of action you need to take is to balance it out with the help of either a pH decreaser or a pH increaser solution. These solutions are available in your local pool and spa warehouse stores.  

Maintaining your Australian plunge pools will give you the feel of an amateur chemist, particularly that aspect by which you will keep an eye on its pH level. All because you need to ensure that your hot tub pool water is clean and safe for chronic use.

The Importance of pH Level According to Pool And Spa Warehouse Team

If you have access to a pool and spa warehouse team, they will tell you that maintaining the proper chemical balance of your swim spa water will not only make it sparkling clean, but it is also of paramount importance in keeping your water pump and water heater and the other system components of your outdoor swim spa from getting damaged. The proper balance of chemicals in your swim spa water parallels with the balance of its pH level.  

But what is water’s pH level? Does it follow that you have to have a good scholastic record in high school chemistry first to know what this is and understand how it impacts your swim spa water? No, that is not even necessary. The water pH level is its measure of the balance between alkalinity and acidity. If there is an imbalance in this area, that would indicate various problems are likely to occur. 

The water pH level would usually range from 1 to 14. If the pH measuring kit registers a lower number, it is indicating that the water is more acidic than it should be, whereas a higher number signifies that it is more alkaline. As for a swim spa, the recommended pH level should be right in the middle. Those professionals working in a pool and spa warehouse would often say that the ideal pH range for outdoor water entertainment features like swim spas should have 7.3 to 7.6. A pH level in this range allow for cleanest water and optimum performance.

pool and spa warehouse

Water is too alkaline if the pH level goes higher than 7.8. There is a downside here when water is too alkaline and that is it will affect the effectiveness of chlorine and make it weak. Chlorine is a chemical added to swimming pools to exterminate harmful pathogens that might be present in the water. Aside from this, a high pH level may also induce skin rashes and may bring about cloudiness in your pool water. This is also the reason behind the white scaling you see on your pool equipment. Over time, the piping system of your swim spa will suffer from scaling. Failure to address this would eventually restrict the water flow. If this happens, it will put a strain on the circulation system of your pool. You know for a fact that this will eventually translate into costly repairs.  

Reasons Why Proper pH Level is Critical

1. Low pH levels may cause skin and eye irritation. 

2. A high pH level will affect chlorine. 

3. An imbalanced level of pH may induce damage to your swim spa’s vinyl liners. 

4. The low pH level of water in a swim spa can cause corrosion. 

5. High pH levels will cause your water to have a cloudy appearance. 

Getting Rescued by Reducers

You can make use of additive chemicals (made for pools), known as pH reducer, to pull the pH level of your swim spa water down. Retailers would sometimes refer to them as pH minus so don’t allow yourself to get confused by that because they are the same. 

pH reducers usually have 2 main active ingredients, sodium bisulfate, and muriatic acid. These products are usually available in most Australia spa parts stores, pools supply stores, online, and even from home improvement centers near your place.  

Take extreme caution when you are handling such a powerful chemical as muriatic acid. They’re so strong that they are used to etch concrete. If you bought it in liquid form, see to it that you handle it with utmost care to avoid accidental splashes and spills. As for the sodium bisulfate, you will usually find them in granule form. Through our personal experience, we know that they are easier and safer to handle than muriatic acid. Nevertheless, you should still wear a protective dust mask to keep you from inhaling dust particles coming from its granules.